Yachting: Topcoats

Jotun offers wide range of colours, excellent gloss and resistance to UV light and abrasion. In addition to make your boat look good, the topcoat is an important part of the paint system and the first barrier against environmental impact. Proper surface preparation is important to get a professional finish as a glossy topcoat will reveal any surface defect after application.

Which topcoat to choose depends on:

- Type of substrate to be coated

- Type of application to be carried out

 

 

HARD TOP

Two-component, clearcoat, affiliated polyurethane with high gloss and super abrasion resistant.

 

Colours /
Film thickness Wet: 75 microns Dry: 40 microns
Application Brush, roller, conventional airless spray
Mixing ratio
Base/Hardener 3.5:1
Coverage 9m²/l
Drying time
Dry to touch: 1h
Full dry: 8h
Recoating time: min. 5h, max. 36h
Can size
0.75 l and 2.5 l
Primer AntiPest or Speed UnderCoat
Thinner No.10 and 25

 

 

TOP ONE

High quality urethane alkyd. Excellent gloss, colour retention and non-yellowing properties. Very easy to apply and very good hiding power.

 

Colours /
Film thickness
Wet: 80 microns Dry: 40 Microns
Application Brush, roller, conventional and airless spray
Mixing ratio Base/Hardener 3.5:1
Coverage 8.5m²/l
Drying time
Dry to touch: 2 h
Full dry: 12 h
Recoating time: min. 18 h
Can size
0.75 l and 2.5 l
Primer
Vinyl Primer
Thinner No.2 and 7

 

 

 

Jahting: Topcoats