Yachting: Fillers

Jotun fillers are based on high technology and innovation. Jotun Yachting fillers can be applied in very high film thicknesses and have excellent sanding properties.

Their main functions are to:

- Level out and smooth the hull surface

- Provide adhesion and cohesion between the surface and the paint system

- Enable sanding with minimum loss of thickness and volume

We recommend two-pack epoxy fillers as they have better water and solvent resistance than polyurethane fillers. They are also much harder and more flexible. For underwater areas only epoxy fillers can be used. We offer three types of epoxy fillers and one gelcoat repair kit with polyester filler. The main difference is the type of finish they provide, their degree of hardness and waterproof properties.

 

 

LIGHTWEIGHT FILLER

Two-pack, ultra light weight, low density epoxy filler for high film thickness. Up to 30 mm on big areas with minor effect on the total weight of the boat.

 

Colours Light grey
Film thickness 2 to 3 cm
Application Spatula
Mixing ratio Base/Hardener 1:1
Drying time
Sandable after: after 16-24 h
Recoating time: min. 16h
Can size 1 and 4 litres
Thinner No.17 for cleaning only

 

 

EPOXY FILLER

Two-pack, high density epoxy filler for small damages and cracks in the finish. Must be recoated with an epoxy paint.

 

Colours White
Film thickness Up to 3mm
Application Spatula
Mixing ratio Base/Hardener 1:1
Drying time Sandable after: after 12-16 h
Recoating time: min. 12 h
Can size 1 and 4 litres
Thinner No.17 for cleaning only

 

 

GELCOAT

Two-pack, fast drying polyester filler for small damages and scratches. Coloured paste very easy to apply and sand, providing a smooth and bright surface.

 

Colours Light green
Film thickness Wet: 1040 microns Dry: 1000 microns
Application Spatula
Mixing ratio Base/Hardener 2:1
Drying time Sandable after: after 16-24 h
Recoating time: min. after sanding
Can size tube 80 ml
Thinner No.17 for cleaning only

 

 

MEGA FILLER

Ultra-lightweight epoxy fairing compound with strong adhesion and minimal shrinkage. Retains its fairness and form during years of service.

 

Colours /
Film thickness
/
Application /
Mixing ratio
/
Drying time /
Can size
/
Thinner /